hmmm I seem to have hit the 16 blinks issue as well just now...
went on a ride, all fine, came back home with battery at 2%, so put it on the charger, had lunch, and after lunch was planning to go riding again but saw the board blinking... checked the app: still at 2% charged, doesn't show it is plugged in. When I take the charger out and turn the board on it works fine - ie no blinking and the board will start and balance and ride... but when I put it on the charger it gives a couple of normal slow blinks as it normally does when you turn the charger on, and then it switches over to the 16 blinks...
will leave it on the charger for a bit but looks like I'll need to contact support... :-/
@Andrew Hmmm I'm about at a CM on the right side and have been having not start up issues like yours, but if I'm going less than a .5 mph the board will disengage. It's happened to me 3x now. Twice when I first go to get on like you and yesterday I was braking for a car, leveled out and the board disengaged. Little different than yours it seems. Sorry, was hoping for an easy answer with the tape.
My board definitely has an engagement jerk. Sometimes more than others, but I figured that was just more me and my balance or center mass at the point. I've noticed with people unfamiliar with the board it seems to be more aggressive but I figure that's because they're not as smooth with their balance.
I've had the click while carving a few times, but never a lot and never to the point where I'm like hmmm....bad?
Looks like your connection to Onewheel Forum was lost, please wait while we try to reconnect.