20 minutes to full charge?



  • Who here is getting a full charge in 20 from a battery at around 5%? It takes me 25 minutes to fully charge from 50%. Odd.



  • Takes me a good solid 35 minutes from about 5%. I've never seen 20 minutes.



  • @Bgrave same



  • I have three OneWheels and they charge full in 20



  • @groovyruvy yeah same. 40 mins for a full charge



  • Wonder why such the discrepancy. @ryan1Auburn what battery so you have in yours?



  • 240v here. Does not take 20min. Rather 40.



  • Me too around 40 min !



  • I've seen mine take over 20 from early on. Havnt bothered to keep track of it tho. Seems always charged within 40 at most



  • You know what would solve this problem? SWAPPABLE BATTERIES for V2. @Future-Motion



  • Never 20 always took 30 minutes. I always wondered why they advertise 20. From battery level 30 it takes a solid 30 minutes.



  • Takes 20 min to charge mine from death. Once the light is green I'll give it an extra 2 minutes then unplug



  • Could people please tell if you are on 110v or 220v.
    Might be a correlation between these.



  • @BadWolf 110v (United States)



  • I charge in 20 minutes. 110 VAC



  • Has someone tried to monitor the battery status while charging? Does 5-90 go faster per % than say 90-100, or 95-100?
    I can't try it, because I can't get battery status from my board.



  • For a full charge, I have never seen the board finish in 20 minutes. It's always been 30-40 minutes consistently. I have no idea where they got their 20 min charge from, but I'd sure love to have that. LOL



  • Mine takes the same amount of time no matter the battery level.. roughly 20 mins



  • I am around the 30 minute mark pretty consistently. Seems like the battery charges like some cell phones where from 0% to 80% it seems to charge a lot faster than the last 20%. Maybe it has something to do with balancing the cells. I wish I could use one of my nice chargers that I use to charge rc batteries where I can put it into balance charge where it shows every individual cell and charges and decharges? "If that is a word" every individual cell as needed until they are all perfect.



  • @ahxe45 The OWheelBuddy and POnewheel apps both show the charge in each cell.



  • @thegreck they do show the individual cells voltage but I can't balance charge the board like you can with rc batteries which if you have ever dealt with them is critical to the overall health and performance of the batteries. I can also put my Lipo charger into storage mode where if I know that I am not going to use them for a while it charges them to a safe storage level where they will not be damaged. I could see this being useful for people who travel a lot and their board may be inactive for a while. Even though they say the lifepo batteries are not the same as Lipo I would still think the basic care and maintenance would need to be used for them.


Log in to reply
 

Looks like your connection to Onewheel Forum was lost, please wait while we try to reconnect.