Lower max battery charge for hill folk



  • For people who start their rides at the top of a hill, it would be convenient to have a setting for the charger to stop and balance the cells at 95% or similar, so there is a buffer for regeneration.



  • @desperado YES! Have been thinking that for awhile. Have had to do contortions to get down my hill to the train station in the morning, have figured out a few tricks but still would prefer just charging up to 95%



  • You can do it with a solar charge controller. Normally you would set the controller to output 58v 3.5 like the wall charger. If you want to charge the OW less, set it to something like 56v and it should stop charging before the OW battery is full. For a source you can use a battery as in the Carvepower portable DC charger-

    Rather than a battery, you could feed the controller with a 24v power supply that will provide 9A or more like this one . That will provide enough watts for the controller to charge the OW at the same speed as the wall charger.


Log in to reply
 

Looks like your connection to Onewheel Forum was lost, please wait while we try to reconnect.