DANGER - Firmware Update 3000
Franky last edited by
@J-Glide good to know! I declined to update tonight and I'll wait until future motion announces a new version.
sifo last edited by
@Franky I received two firmware updates today. The last one I think is 3030. I noticed that on extreme there is no push back anymore, or if there is it's very subtle. I also noticed about the time I used to feel push back, it now pulses forward making the board feel unstable. It almost feels like someone is pulsing the throttle. I just slowed down so I wouldn't die.
So your current firmware is 3030?
J-Glide last edited by J-Glide
@sifo I got another firmware update last night. I think I have 3034 now. It also seems to have fixed the issues I was having with 3000 and 3030.
Franky last edited by
@J-Glide I received my board in June and 3000 was already loaded.
I have never been prompted by the app to update the firmware until last night.
Last night I declined to update after reading this post.
Currently the app is prompting me to update to 3034 and my settings say I'm on 3000.
After you updated did your app settings change to show 3030 or 3040 as the current firmware or does it still say 3000 even though you had installed the 3030 and or 3040 update?
lynnpreston last edited by
I need to amend my comment from yesterday. Today I opened the app and was presented with a firmware update to 3034 (I had been on 3000). I performed the update, which was successful. Now my settings page reports firmware 3034. However, whenever I restart the board and the app, I'm presented with the firmware update again (3034) like others have mentioned. It's easy enough to decline the redundant update, so no big deal.
fabuz last edited by fabuz
i never use the OW APP(android user:worried: ) , just for switch in extreme mode with iphone's friend.
i ride extreme mode since the beginning and when i ride my mind stay connected with my back leg (i'm regular/right leg back) and i learn to listen the board..
Brake capacity is amazing with the OW and the first thing i made is a good balance for a good big braking..OW have limits
future motion say:
Some riders have the tendency to 'fight' the pushback
time will come for top speed sensations :eyes:
Stay your mind connected to your board :exclamation: :exclamation: :exclamation:
veryous last edited by
@J-Glide I got it last night, loaded it. Jumped on the board and it didn't kick the gyro in, which was weird that first time but worked after. Floated around, took the dogs out, seemed okay but I didn't seem to notice anything different really in my quick ride. What did it fix for you?
groovyruvy last edited by
Last night I had pretty much the exact same experience as @erichs. I'm a new rider so I'll chalk up the nasty road rash and sore muscles from 2 very unpleasant falls getting pitched off the front of the board, to me not knowing how to control it; but it felt like the board was getting away from me and I simply could not get it to stop or slow down. Assuming there's nothing wrong with the firmware, I suspect (sincerely hope) my issue is that I need to shift my weight (center of gravity) back, which isn't necessarily the same as pressing down on the tail with the back leg- I get that. I also uploaded to the new firmware 3034 this morning, anyone know what upgrades it included?
SkateFirst.SamT last edited by
I think this could be from trying to drive with the angle of the board by pushing your feet up or down VS. driving with your hips. Where ever your hips are as opposed to the wheel is where you will go. forward backward and turning (either side)
Blades last edited by Blades
I just did an update today. the board shut off and now it wont turn back on. Its getting hot too...
there was an update last week and it worked fine.
@Franky It says 3034 now
Blades last edited by
Well now the board light comes on but it isnt working.
@veryous With 3030 I noticed the board would pulse around 10mph. It kind of felt like someone was pulsing the throttle.
@Blades can you connect to it with your ios?
Blades last edited by
@J-Glide it connects without the light on the board. But it says download done, Writing to onewheel.. 100% " but its setting at that screen.
@Blades That doesn't sound good. I'd strike up a conversation with OW.
chasbro last edited by
downloaded 3034 this morning, board works just fine, no problems!
DocBlock last edited by
Blades, I had the same problem when I tried to do the update two of my three boards. One of them took it perfectly, the other two seem to have stalled during the download resulting in what appeared to be a frozen board no lights, no nothing. I shut everything off 'forgot' the board through the app and eventually it did update
I was just messaged by OW this afternoon. There is a glitch in the 3034 app update that keeps asking you to update your firm ware. OW said "The app got updated on apple's store and it had an issue where it would tell people there was an update to be installed even though no update was released for the board. Right now the app should be asking you to update to 30034. if you already did that, then just press on update later and ignore it. if you are not on 3034, then update once and then ignore it from then on.
we already submitted to apple the fixed app and should be out soon. that will make the app stop asking to update".
veryous last edited by veryous
@J-Glide you should probably make a new post on this. 30034 App update glitch/issue with new firmware update constantly asking type wording as the title.