So i got my onewheel, first impressions...



  • oops - yes absolutely right @forzabucks - I meant sensor pads at the front indeed! Sorry for the confusion - that was a quick reply whilst onewheeling at the beach yesterday :smiley:



  • @Bart said:

    oops - yes absolutely right @forzabucks - I meant sensor pads at the front indeed! Sorry for the confusion - that was a quick reply whilst onewheeling at the beach yesterday :smiley:

    How odd, I thought you were a sensor pad to the rear guy - like me. Appears I am alone in this preference.



  • @Andrew I will be both I try to send 1/2 my time riding switch

    I ride goofy - I'm thinking left foot (back) on the wood board and right foot on the electric one, but will see when I get my onewheel!
    But to go in the other direction I prefer to get off the chair lift with back foot bound in and front foot sitting in the bindings so maybe back foot with the electronics.



  • I ride goofy as well. Do yourself a favor, keep the sensors up front.



  • @DocBlock
    You should make a tutorial video of dismounting suddenly. Like going fast and coming to an obstacle. Like get a dummy baby carriage to come across your path.

    I figured that since I'm focusing and braking with the back foot I can also move that back foot at the same time. I'll try out the other way though!



  • Wish I would have checked this before. I just spent the evening out riding and I would have video taped something. I will on our next ride --⚫️--😊



  • @DVO I'm also curious about push back and him not being able to slow down. Anyone?

    Something similar keeps happening to me. Riding in classic mode, accelerating nicely, then pushback starts. And as @leperkonvict said, the read end goes down to the point where I am afraid it will start scraping the pavement, but the board does not slow down much. At this point my back knee is straight and my front knee is bent to accommodate the height differential b/w front and rear of the board. As I try to straighten my front leg to come to level, the board accelerates again and pushes back again, so I am stuck riding in an uncomfortable position and still going quickly. Eventually, as I am able to straighten both legs I regain control and can slow down.

    I am guessing the board does not slow down because it still senses pressure from the front foot and the fact that the board is angled up is not really taken into account.



  • @Abe It's not the angle of the board that slows you down, its your weight shifted behind the centerline of the wheel. You just need to shift your weight towards the rear of the centerline of the wheel and you will slow down.



  • @Abe It sounds like it is time for you to get out of Classic mode. There is nothing you can do about your issue, short of switching to Extreme.



  • @jim It's not the angle of the board that slows you down, its your weight shifted behind the centerline of the wheel

    Hmm... Interesting. How does the board know about my weight being shifted ? Can't think of any way that does not involve sensing the angle.
    And as I am already standing on an angled board, I hesitate to shift more to the back, for fear of rear end catching on the pavement.
    Ultimately, what is the point of pushback ? Wouldn't it be better for the board to just not accelerate past the limit ?



  • @Abe had the same thing happen to me on my first day where pushback had gotten my board so far back that I didn't feel I could lean back to slow down for fear of tail sliding. So I just kept riding in that position until finally I bailed... Thankfully ending up on my feet.

    My theory is that they feel this is still better than letting an inexperienced rider keep speeding up and eventually nose diving and getting thrown. This only will happen when a rider keeps leaning forward when getting pushback instead of relenting and backing off sooner. If you think about it I'm not sure what else they could do to slow a rider down. They can speed you up to keep the tail up higher so you can slow down if needed but then you are going faster which isn't good for a beginner and pressumably could keep it up past top speed and get thrown with a nose dive. Or they can do what they are doing which is trying to get you to slow down first or bail if that doesn't work.

    What is interesting is that in extreme this doesn't happen. And in fact in 3034 you have to ride pushback if you want to get max speed. But even though you are riding with nose elevated you never get to the point where you don't feel you can lean back to slow down. On the other hand if you keep leaning forward through extreme pushback eventually your nose will come down because you will be at max speed and literally balancing between top speed and taking a nose dive....which is a dangerous place to be. I was not a fan of the early extreme pushback at first and I still don't enjoy riding with nose elevated like that. However, I think it is extra safe because riding with the nose up seems more defensive against bumps and dips and it is a deterrent to riding at top speed where the board has least capacity top keep you upright. Maybe v2 will have a larger motor to allow pushback to kick in at higher speeds.



  • @Franky
    The onewheel wants me to slowdown so it puts me in a position of going uncontrollably faster via pushback?
    I know that experienced riders can adjust to pushback, but I also know that people on this Forum (including myself) have thought about renting these out and I just don't think that's a good idea.
    I don't get why there's just not a top speed.



  • @Franky said:

    If you think about it I'm not sure what else they could do to slow a rider down. They can speed you up to keep the tail up higher so you can slow down if needed but then you are going faster which isn't good ...

    Hmm, wouldn't the tail go up when the wheel slows down, rather than when it speeds up ? How does the board balance ? I'm just guessing, but If the rider's weight is right on the centerline the board can go at constant speed. If the rider leans forward the board has to accelerate to push the rider back. Once balanced, the new rate of speed can be maintained. Or do you think there is an additional board angle control mechanism apart from wheel acceleration/deceleration ?



  • @Abe good questions. I don't fully understand how it works.

    I'm guessing that the tail will go up or down based upon your center of gravity when slowing down.
    If you are already leaning back riding pushback, slowing the wheel might make you tale slide.
    But if you are more level I would imaging slowing the wheel would send you forward for a nose dive.

    Yes, I have been assuming there is another angle control mechanism which plays a part.
    I started thinking about this because the wheel is locked or stiff when it is on but you are not riding it.
    All I can say is that there has to be a lot of math that goes into the algorithm.


Log in to reply