Took my OneWheel to the Beach
SC720 last edited by
Who knows maybe the sand is a little different where your at but haven't heard of anyone else with these issues at the beach...if you had fun you could at least get a plug for the charging port and tape over power button or both.
Julian last edited by
Hey @NsinR8, that definitely sounds like an anomaly. If you sent an email to our support email, you will get taken care in no time. We ride our boards at the beach all the time and have no problems. Remember though, Riding your Onewheel through water is okay but you don't want to submerge it into a wave or in deep water, although that usually would be no problem, it's just asking for trouble.
ThatGuy last edited by
To the extent possible, it seems like cleaning with compressed air would be safer.
I ride mine on the beach a few times a week. No real issues. A few pointers:
1.) Get yourself some Vicious grip tape to replace the stock tape. It works SO much better with sandy shoes/feet.
2.) Try going barefoot at the beach. Even with the Vicious tape, it doesn't hurt me, and sandy skin seems to grip better than sandy shoes.
3.) Don't ride IN the surf. I occasionally go through a tide pool as necessary, but I don't like to tempt fate. Riding an electronic component intentionally through salt water at speed seems to be inviting disaster.
4.) Stay on the hard pack. Damp hard pack is fine and has never caused me any issues. Low tide is the best.
5.) Get yourself a fender. It is fantastic and eliminates water and sand getting thrown all over you.
6.) If the board got damp, let it dry off, then use compressed air to clean up. Or use the compressed air to help dry it.
7.) Obviously you have to be more careful carving on the sand. The OW has a tendency to dig in suddenly if you carve hard. Take it easy at first and get the feel. Carving in the sand can be very rewarding. Try it on a slight toe-side to heel-side slope - carving up and then back down the hill. It feels quite a lot like surfing to me.
8.) This is what it should be like:
Onewheel - Low Tide
adubberley last edited by
I had similar issues the only time I took my OW to the beach. It had to be shipped back to FM for repair. I know lots of OW riders frequently hit the beach, but I'm never risking that, again.
Also, FWIW, I have taken both my OW's to the beach many, many times. No issues with either. My point is that it should work fine.
njcustom last edited by
I would think wet sand in the charge port could cause a problem..
Blowing it out with compressed air or just your mouth eliminates the issue.
ThatGuy last edited by
Or, machine wash, gentle cycle, and use only non-chlorine bleach when necessary.
lardnicus last edited by
@lynnpreston You said you changed your grip-tape? I saw a while back on here somewhere instructions on how to do that but can't find it again. You wouldn't be able to help me out would you?
NsinR8 last edited by
@lynnpreston right on