Have you done any customization or any modification? Post pictures!
-
@No And for that price you could get two Alva pool decks (beautiful maple) with change $.
-
@FutureBoy true, but for my project, I wanted to replicate the stock footpads, but I agree, if looks weren't a concern (not that the decks look bad, just a preference) using real decks would be the best option for sure
-
@No Thanks for the insight. I wonder if you sealed the pressed footpads with any polyurethane or if humidity was high when you vacuum sealed the footpads. Warping would be no good!
If you are done with your roar-rocket supplies, I might be interested in taking it off your hands :)
-
This post is deleted!
-
Trying to decide between these wraps: 3M Red Metallic and Autvivid Carbon Fiber Burgundy.
I was also considering layering 2 colors (like burgundy and black) and cutting out a pattern revealing the color below but I'm not sure how well these things sit on top of each other...Possibly a burgundy wrap with a spiderman logo cut out to reveal the onewheel blue underneath?
-
Nice safety feature from the side
owarmor.com ) @itwire ( Skinny rails and OWReflect, pretty hot and tempting
-
Added a side handle. Been using it for a couple weeks, I've sent my OW tumbling down a few rocky hills, and it's still holding on.
Edit: also shown in the pics... I stripped all the paint off the hub and rails, then repainted the rails with 3 stripes of exposed aluminum.
-
now that's "customisation"!:)
nice pics
maybe add a laserscope or someting ;)
-
@timvdp hmmm maybe a paintball gun...
-
@ricoburgos looks sweet!
-
Nothing fancy - but in case anyone was wondering what the clear vicious tape looks like on the OW+:
-
@iiikz Ha! I did the same but on the back only. I thought it would be more see through than it is but I'm so happy with the grip of the vicious tape that there's no going back. Also, covering that ungripped piece of wood was necessary.
-
@polysix yeah, once i realized how easily the original tape peeled off i decided to go ahead and peel the front as well.
at some point i plan to pull the back off and do something with contrast - either stickers or something of my own design.
-
mwa I think it looks a bit unfinished/ pale wood..not dark laquared..no logo
but it gives us an idea about the new sensor of the +..thanks!;)
enjoy!:)
-
@iiikz Quick Question: Were you able to peel off the original tape in once piece?
If so, I may do the same and try and keep the original on standby in case I need to send in for warranty work. That way I could potentially re-apply the original tape to avoid voiding the warranty.
-
@Snurfer The original grip tape came off my V1 in one piece, and I didn't even heat it up. The tape is stronger than the glue, so you shouldn't have a problem.
-
@Snurfer im preety sure taking off grip tape dosent void your warranty as long as you have the foot pad with plastic on the sensor you should be good
-
@jew_fro_1009 Unfortunately that is not what the owners manual says for the Plus.
-
@Snurfer yes, and it was surprisingly easy to remove. no heat required - i literally just started in one corner with my fingers and it pulled off with ease.
-
if the first complaints where true about the tape peeling or coming loose in the first weeks of use or with a fender....they can't(shouldn't) use loose tape or no tape as a warranty void right!?!? :(:(
