Have you done any customization or any modification? Post pictures!
-
@J-Glide Nice work! Thanks for doing this video. I was wondering how you swung this. My initial thought was to mount the controller under the front pad to maybe reduce the amount of water/grime that gets to it from the wheel...but that means running the wire under the front sensor pad and not sure if that would affect anything. Any thoughts?
-
@SC720 I'm not sure there would be room for it there. Since the wire and controller have a simple wire clip to undo, you can just unplug it, and put it in your pocket when you are going to hit some wet stuff. Maybe attach the controller with Velcro so its easily removed. The wire shouldn't be hurt by water.
-
@braswell Thanks for the compliment on my sick glue gun. Hahahaha.....
-
@J-Glide Sorry I wasnt clear...I meant mounting controller under front/sensor part of the board and not actually under the pad. Of course its all moot if if you ride goofy or reverse.
-
@J-Glide I'm on the newer side of the onewheel community, so pardon this If its a dumb question. But the rails on your board are army green. Did you paint/wrap them or were early versions that color?
Just curious. Thanks for the video!
-
@J-Glide Great Video, can't wait to see the EL-Tape. I know what I want to see but can you do it :wink:
-
@KeithVlk This color was used on certain boards given as demo boards during the summer of 2015. I purchased this board used off a guy on ebay.
-
@J-Glide Any chance you can post a picture of the bottom of the board showing the controller and rest of the wire glued?
-
@uncbeast5 Also, is 9 ft wire El wire fine or would I need longer el wire?
-
@uncbeast5 9ft is plenty. I cut mine down actually.
-
@J-Glide ahhhh. Cool. That's pretty awesome. Thanks for the info. And thanks for the video! EL wire looks awesome
-
@J-Glide think I might try and put some el tape or the wire in one of my fenders.. Mold it In with the carbon fiber.. Like a glowing racing stripe
-
@njcustom That's an epic idea!!!!
-
@uncbeast5 You can cut it on the opposite end of the controller without hurting it. I already took it off the board so I can start my next project, or I would take a pic.
-
 
Very straightforward black vinyl wrap.. Never wrapped before but I'm happy with the results and the clean lines - just wish I'd done it before scratching the F out of my rails!
-
@libertine image too large, downsize and upload again :)
-
@J-Glide Thanks for the inspiration. I'm loving the tron lights!
-
@uncbeast5 The red lights are lookin sweet. Nice work!
-
Steampunk Onewheel!!!!!
-
While I wait for the vinyl wrap to arrive I decided to use a can of plasti-dip I had on my onewheel.
Not the cleanest taping job, the Duct tape stuck to the dip in places, but came out okay.
I'm not sure it'll do much in the way of preventing scratches, but I like the stealthier look.
