Slick Hoosier replacement tire- I found a winner
@No Yea man, thank you for exploring a new tire to try. I would have gone right back to a Vega if not for your review. I can see quick change tire/axle assemblies in the future along with removable battery packs for the OW. I have another idea to dampen vibration under the footpads which could either be one sided sticky rubber tape or weatherstripping of some sort. It's great to see people venturing out and creating aftermarket mods for our boards.
One note: I got out and about in my neighborhood on the streets and sidewalks. I decided to let some air out so it would have a little more give for cracks and uneven terrain. What surprised me is that the lower air pressure had almost zero effect on the turning ability of the board while soaking up bumps much better.
If you guys and girls try this tire, do NOT apply the same foot pressure in turns as with the Vega tire, you will find yourself dealing with some crazy rocker stalls. That's it, this tire adds more rocker to the board. I found myself putting more front pressure on in heelside turns to keep from going sideways at higher speeds. At lower speeds, I can run fast up to a light post or any obstacle and crank around it in about a foot radius, it's ridiculous.
I got up to about 17 mph on my street and it felt fine tracking straight.
If you like to turn, do figure eights, surf the world, try this tire out. I don't regret changing it.
For those of you starting out, wear the Vega out first. learn the board and give it a shot.
Since the tire is smaller and I was running a lower tire pressure today, I didn't quite make it to my gym which is my regular trip. About 5.7 miles. Missed it by about a half a block.
I added 5 bike pump inflations to it tonight and i still like the ride.
If any of you are going to try this tire, I suggest pumping it up to a point where when you go to start on the board, push down on the front pad and you should see just a small amount of flex to the sidewall, not squishy. Now if you are going offroad, go for some squishy, lol
Once I find my digital guage, I can give you an exact psi
I did the 11/6.5/6 treaded hoosier and run it at 15 psi. It didn't rub too much when I first put it on so I just ran the board off the ground and hit it with an old school metal file over the center of the tire. Now no more rubbing. I'll probably add more air as time goes on and the tire wears. I do really like the increased manuverability of the rouded tire. Can't wait to try the treaded tire on a wet and muddy golf course and see if it helps.
No last edited by
@wr420 Congrats on the successful install, which compound did you get?
@No I went with the hardest I could find available for that tire, D30. Still soft though, but not foamy.
I've been out a few nights and holy shit!, I'm pretty much in snowboard gear. lol
No last edited by
@wr420 Sounce nice man, the wear hasn't gotten much worse on mine, but I'll be going with the D30 for sure next time
mrb last edited by mrb
are you moving faster with the smaller circumfrance and smaller contact patch?
keep in mind your speedometer counts revs and will read a little fast.
I went with the A40 compound and I'm running it at 13.5 psi
@Earthpilot I probably would have gone with A40 but it was not available on the threaded model. I think the A30 is still realitivly soft stuff but it's not foamy like the A10.
Earthpilot last edited by Earthpilot
@wr420 Where did you get it? The D30. I found it and it's about 83.00 shipped. Just curious if you got it cheaper, thanks.
Edit: I just bought it. Can't stop riding...
Ansen French last edited by
I want to find a working vega treaded tire
jeffmccosker last edited by
Yup! Hoosier 6" slick is the best tire.