Hoosier Treaded Tire & Rubbing (w/ solution)



  • @desperado

    In theory, mine have carbide inserts as well, but they are cemented in rather than brazed (or so says GripStuds). I was going to baby them and only ride it on ice, but maybe after my initial experiments, I should run them through the ringer and see if the short purchase of the screw or the carbide fails when riding on pavement.

    I do have the same tire, but the OP of this thread is running the 5.5 treaded hoosier's up to 45psi with supposedly better results (at least better range i'd imagine, but also better sidewall stiffness). So during the stud install, I pumped the tire up to 40psi, and I started to get interference. I'm not sure I would necessarily ride at this pressure but I'd rather have a little more clearance. I took it back down to ~20psi, and there's plenty of clearance. I'm still going to try to keep that center row as short as possible, so I at least have the ability to pump it up higher.

    In the next week or so we should have some frozen ponds and we can start comparing the two executions more closely. I'm sure other ice/winter riders will be interested!



  • @makermarc
    I ordered an extra 150 studs just in case I wanted to go crazy with them, so I really hope the premium price is worth it. Next week it's supposed to freeze, so I'll be trying the Hoosier for the first time on my favorite trail, will get some gopro footage. My life will really be complete when I get my Flight Fins... Did you order a set?



  • @desperado

    I guess you'll only find out if the price is worth it if my experiment goes poorly and yours goes well haha. Peace of mind certainly has a significant cost in this case. I'm ready to part with my brand new tire if it ends up being a disaster ¯_(ツ)_/¯.

    I think i'll be doing some barrel races on the ice with a friend of mine (he's got his own electric powered contraption i'm not allowed to talk about). I'll try to get some footage as well.

    I didn't order any flight fins yet, I was just a little taken aback by the fact that it bolts to the stock fender (major fail), and costs probably twice what it does to just print the thing out in a similar material from Sculpteo/Shapeways (takes less time too). If i really feel left out i'll just make something similar, or maybe experiment with magnets or other methods.

    My first fender got smashed up during a malfunction. FM replaced it and fixed the board, but I don't really have any intention of using it due to how fragile it is. I guess people are converting it to magnet-mount to help, but there goes the whole flight fins functionality thing.



  • Hey guys, haven't posted in awhile, been riding. I just replaced my Hoosier 11x6.5x6 the other day with 1990 miles on it. Saw threads and she gave out a couple days later while charging overnight. The reason I'm posting is that I wanted to let everyone know that I ran that tire at 15 psi and never had rubbing issues.
    I mounted the same tire the other day and I'm running it at 17 psi and I can hear a very minor rub but that will go away in about another week.



  • @earthpilot
    15 psi would be too low for a lot of people. Have you tried the 11 x 5.5 x 6? It's definitely more maneuverable. How would you say your Hoosier compares to the Vega in terms of carvability?



  • @desperado I've run the Hoosier 11x6.0x6 slick in a 10 compound I believe? Oh, it was crazy maneuverable but the tire wore out at 528 miles.
    The 11x6.5x6 is my "Go To" tire now. It shines around 7 to 10 mph for turns but I still carve turns between 10 to 15, just not as sharp.
    I will never go back to the Vega, the Hoosier makes the board into a short board type onewheel if that makes sense. D30A from either Jegs or Smiley's racing online.



  • @makermarc
    I'll be looking for that footage!
    I was working on my own equivalent of Flight Fins when I found out about them. Materials would have cost me at least $50, and I will gladly pay these guys the extra $50 to save me hours of my time designing and tweaking. I always ride with the stock fender so, for me, bolting to the fender makes sense. I know they are are working on a fender-less version next. Their videos left me drooling so I'm willing to take the plunge for $100. If I end up cracking my fender or they suck for some reason, well, it's only $100. I'm sure lots of reviews will be rolling in in a few months.



  • @earthpilot have you tried the 5.5"?





  • @makermarc
    Nice, mine are working as well!
    https://youtu.be/Ne5ocRdo-2Q



  • @gwinntanamo No, I've run the stock Vega, a 6 inch Hoosier slick and now two Hoosier 6.5 treads.



  • @desperado Update on the CheapStuds™, it looks like these are definitely snow/ice only. My friend was hitting the sidewalk for a bit on it and looks like one of the studs was trying to escape. I also had a leak through one of the screws early on but the slime fixed that completely. I'm running at 15psi (room temp) which is ~12psi (running temp lol). Maybe 1-2psi more would be ok but then it stops going over snow so well. Really good grip though, starting to get a hang for the powerslides which are insanely fun.

    0_1514595457093_screw_stud.jpg
    Side note, biggest issue so far was just keeping a grip on the back footpad. That problem has since been resolved, the traction pad works incredibly well, foot feels right at home as soon as you step on it. No more teeter-tottering or cleaning off ice. Very connected feel.
    0_1514595641167_traction_pad.jpg



  • @makermarc
    My grip studs have not backed out yet, despite some concrete riding. Will keep checking. How did you make that traction pad??!! I need one!



  • @desperado Traction Pads - Amazon

    An awesome bonus is being able to pull the board toward you with your toe. No more reaching down and moving the board for any reason.


Log in to reply