Spend My Money -- Newbie Recommendations
WaftingTransient last edited by
@life-themovies Protect your nuggin my friend, by any means necessary.
By all means.
CapoDelToro last edited by
@george are you selling it? Looking for an XR...
V1 (Kickstarter) and I live in Europe (transport $$$).
Btw before I sell it FM would need to convince me (they have the diagnostics) that I did something wrong or send me an explanation incl. a part I would need to replace.
CapoDelToro last edited by
@george oh. You said you’re done so I assumed you meant you were getting rid of it. I have a V1. Looking to upgrade. Good luck on getting an explanation from FM! ;)
I‘m not expecting a response from FM. If there is music out there (nosedive) then FM should face it, fix it and get on selling this great product. My leg will heal but as long as I don‘t know what went wrong there is no way I can get back on the board. I ski, go biking, inline skating and have crashed with all of my toys...but I always got back onto them because I knew why I crashed.
I know you think I‘m whining but actually I have too much time on my hands now and think others should understand that there might be an issue with the board. Not for the tough guys pushing it to the limit they are prepared for a crash but wusses like me that just like to cruise around on a Sunday afternoon.
I was looking at the XR myself...wonder what my wife would do if it showed up on my doorstep :-))
Mot last edited by
I am 50, but with decades of board experience. The full face helmet is really overkill unless you plan on testing the speed limits of the board. If you already bought it, you might as well wear it until you gain some confidence on the thing.
In order of priority I would say helmet is essential. Don’t even balance in your basement without one. The hardest falls I’ve seen localy haven’t been nosedives. They have been dismounts gone bad. Wrist guards would be next highest priority. Not so much for protecting against fracture, but more to keep from having to pick sand and gravel out of your palms if you take a header.
Elbows are next and then knees if you please.
As far as skids and skins, save your cash. It’s a onwwheel, not your grandmas bone China. They look cool with some “experience-marks.” Plus the skids take away some clearance on the XR. Less is more.
No balance board or exercise is going to prepare you for the riding experience, like riding it. You won’t test the battery limits on your board for quite awhile. Ride it on multiple short rides (15 minutes or less) over several days, to build onewheel endurance. If you take it on an hour ride on day 2, it will sit in its stand on days 3-5. Also, the fatigue that initially comes with the riding stance leads to newbie safety issues on longer rides due to soreness and initial lack of stamina.
Life+themovies last edited by
@mot sage advice. Thank you sincerely for answering all of my questions. I returned the full face helmet and got the dual certified Triple8 one. I'm happy with it. I also invested in good wrist guards. Bummer that I cannot wear my Apple watch with them, but oh well... I won't need distractions anyway.
I had knee/elbow protection backwards. Always thought that if I bailed, my knees would hit first and I could throw down my hands to roll way before my elbows took the impact. Thanks to your note, I'll be looking into relatively inexpensive (but still effective) solutions to both with the intent to shed them once I'm confident on the board.
And good stuff on the short rides initially. The last thing I want is to be so sore that I cannot ride the next day. Thanks again!!
skyman88 last edited by skyman88
Some of your questions are like asking "what kind of shoes should I buy"? The answer: it depends.
I did not have float plates or side kicks on my OW+ as they did not exist when I bought it... but I put them on my XR day one. A nosedive on pavement ate a good chunk of one of my rails, figure like my head, why not just add some protection on my investment. Most skaters love the "well used" look of a used board and think the ride should show your learning and battle scars. That decision is yours... a OW cost a little more than a new wooden deck.
Helmet I think is a must but I ride with some folks that don't wear one... they also don't wear seat belts in cars and are still alive. So it's another case of do you plan for the worst or hope for the best.
I personally wear wrist guards and elbow pads (in addition to a helmet). I feel more confident with them on knowing that my chances of surviving a fall or not getting gravel/dirt in my palms is greatly increased. I use Killer 187 wrist guards and Triple 8 elbow pads with the hard shell. The flexible ones help with impact but don't slide well. I wanted mine to protect against sliding on pavement more than hitting rocks. I started with knee pads as well but stopped wearing them after a few months as they were hot and never used. If I'm doing something crazy in the woods, I might still get them out but for normal riding I feel ok with out them.
In my opinion, the best way to answer most your questions / concerns is just to start slow and take it easy. Spend an hour working on dismounts. Spend an hour going back and forth in a straight line. Spend an hour just doing circles, etc... then start cruising around once you have some basic skills and confidence. Being over confident is what I believe causes most accidents... or simply too comfortable. At least for me and some of the local crew that has been the case.
Last comment: both on rough sidewalks and definitely off road I have hit my float plates with enough impact to shatter the FM plastic parts. I don't grind anything but know 100% my board would have needed repairs without those plates. No concern about ground clearance with The Float.Life plates on my OW+ or OW XR. But again, depends... are you cruising the beach or aggressively riding in the woods?
Edit: I have Greg's SilverHandle (available from him or Craft & Ride) on both my boards and they work great. Small, light and super durable. Makes it easy to carry board like a suitcase when needed. I also have OW Armor reflective rings on my wheels. I thought about adding more but the wheel has been good enough for me riding in the city at night or my neighborhood. I also invested in a good $100 flashlight for really dark areas to avoid large pot holes and such. I have a @njcustom magnetic carbon fiber fender; it's the best of both worlds. I prefer riding without a fender, I like the way the board/wheel looks. But if you are riding near mud or want to keep shoes/pants/legs clean, the fender just snaps on in 2 seconds. There are a lot of options for foot pads, grip tape, etc... out there. I'd wait until you find you need something before you buy it. I'm still on factory grip tape but know for a fact it's getting worn and dangerous on aggressive trails but again if you're just cruising pavement and sand, maybe it'll last a life time.
Life+themovies last edited by
@skyman88 extremely helpful, thanks! You now have me reconsidering float plates...