Flight Fins/Fender/Shield - First Impressions
Glyph last edited by
@jonas - it's definitely narrower than a "standard" fender. I haven't ridden it in wet conditions.
My concerns are:
A.) It's SO easy to remove, that I am fairly certain that it will occasionally shift out of place and get loose while riding rough terrain, and probably whenever you roll the board (the only thing holding it in place is flex-tension). To me, this seems like it would be a hassle to constantly adjust, for you off-roaders. I mostly ride pavement, so it will probably be less of an issue for me; I'll just put it on whenever it looks to be wet outside. It'd be nice to have a slightly more secure attachment.
It just occurred to me: you might be able to add some adhesive industrial velcro, that'd probably do the trick, it'd be just as easy on/off, but stay in place through any jouncing around. If I do this I'll report back.
B.) Aesthetics: it looks a little corny to me. I don't have it handy to take a picture, but because my Fins are set pretty much at max height and the Shield rests on the top Fin bolts, the Shield rises like the St. Louis Arch over the tire when viewed side-on. Something a little more low-profile, that follows more closely the curvature of the tire, would look more sleek. I could trim the Shield to be a little shorter (and I may) but I'll probably end up with raggedy edges (or at least not clean rounded corners to it) when I do, which is a bummer.
Vitaly last edited by Vitaly
@Glyph Flight-shield PRO has been released:
I've just got my Shield, now I'm looking into PRO version.
@MichaelW please confirm there are no other new shields coming out soon? As every time I order something, new version of it coming right away after. Lol.
Glyph last edited by
@Vitaly Ain't that the way of it. It's pretty pricey too ($40 plus $5 shipping for a rectangle of flexible plastic?). I'd definitely want to hear from someone who got one before I pull the trigger.
BTW, thanks for the tip and pics on the additional bolt to put the Shield inside the Fender. I did the same.
MichaelW last edited by MichaelW
Hey guys! Yeah, we released this Pro Sheild yesterday. blocks the fender slots, works with FlightFins or without, is lower profile and is pretty indestructible.
mrclowny last edited by
Probably should hold off on the pro shields as they'll bring out the pro v2 as soon as you order it. LOL
Glyph last edited by Glyph
I received my Pro Shield. If you are wavering between the original Flight Shield and the Pro, get the Pro, if you can afford it. It definitely looks, functions and installs better, IMO, though it ain't cheap.
Vitaly last edited by
That's my two dollars solution how to attach FlightFender to Craft&Ride OneTail :)
tomfoolery last edited by
@MichaelW so does that shield sit between the tire and the fender or is it still supposed to slip in between the fins and the fender?
E-Wave_I last edited by
@MichaelW I rode the FlightFins without fins or shield for about a month thinking they would be better than nothing and more convenient than the OW brand fender. The slots let a lot of grit through. The original Shield apparently requires Fins to work and rides too high to remain stable. The Pro is definitely perfection IMHO. It stays in place, covers the slots fully, sits nice and low, stays in place and the side edges are contoured to be narrower at the peak, allowing tumbles without jarring the shield too bad. I've driven through some serious puddles with no splashback. Being removable, it makes it easy to hose down and dry the board after a muddy ride. Not sure about the Fins themselves. I weigh 220 lbs. and don't really want to be literally jumping the board up curbs. Nor do I want anything possibly grabbing my foot during a nosedive.
MichaelW last edited by
@tomfoolery Pro shield goes inside the fender and into slots. Classic tucks behind the fins. You pull the fins back a bit and wedge them in there. Pro is the better option and an improvment over the Classic.