Future Motion last edited by
It's a good day to be a Onewheel owner. Why? Because your board just got better. Welcome to the new Gemini Firmware for Onewheel+ and Onewheel+ XR. Not only does the new Gemini Firmware update introduce rideability improvements across the board and enables you to share snapshots of your adventures, but it also gives you control over the most advanced riding platform on the planet. You are now at the controls with Custom Shaping. Tune it up, dial it back, and find your perfect riding experience.
Woah... it just got real.
Have any questions? Check out the FAQ below and enjoy!
What’s the difference between the new Gemini firmware and the old firmware?
The new Gemini firmware takes the experience of riding a Onewheel to the next level. On top of improvements to overall rideability, the new Gemini Firmware puts you in complete control of your riding experience with Custom Shaping.
Custom Shaping is a powerful new tool that we are super excited to offer our riders. It’s the most advanced riding platform on the planet, empowering riders to customize their board to their dream riding experience. Change from a loose floaty ride-feel to a tight responsive experience with the touch of a finger. It’s powerful stuff! It’s one of those thing you have to try to understand so go update your board and see for yourself!
How do I get the new firmware?
Getting the new Gemini firmware is going to make Onewheel+ and Onewheel+ XR life even more awesome!
To get started, update your Onewheel app on your smartphone. Once the app is updated, open it and connect to your board, you will see a message that asks you if you’d like to upgrade your firmware.
Make sure your board is plugged into the charger and then select “Update” in your Onewheel app. Place your phone on the front footpad of the board during the update and do not use your phone for anything else or unplug your Onewheel from the charger. Once the update is complete (should take 3-5 minutes) you will see a confirmation screen on your smartphone and you are good to go. Your board just got better!
My upload failed. What should I do?
Don’t panic! You got this!
Most failures will occur for four reasons
- Your phone was taken out of range (don’t walk away from the board with your phone in your pocket).
- Your Onewheel was unplugged midway through the update. Your board needs to have a power source during an update of this magnitude. Leave it plugged in.
- You closed your Onewheel app. It needs to be open.
- Your phone died during the update. Plug in your phone.
To recover your firmware update, connect to your board again. You will see a message that your update failed or your firmware is corrupted. Select OK and follow the firmware installations instructions on the app. Read them! Make sure your board is plugged in, make sure your phone is in charged and in range and then select ‘start update’. The progress will start again and you should be good to go.
Do new boards come with new firmware?
Yes! We are happy to say that all new Onewheel+ and Onewheel+ XR boards come with the new Gemini firmware pre-loaded so you are set to jet right out of the box.
Can my original Onewheel get the new firmware?
The new Gemini firmware leverages the increased power of the Hypercore motor found in Onewheel+ and Onewheel+ XR so unfortunately this update is not transferable to original Onewheels. We’d definitely recommend finding a friend or a local retailer with a Onewheel+ or Onewheel+ XR to try it out. You might just need another board in your life!
Is the new firmware available for iOS and Android users?
Yup! Now go download it!
LidPhones last edited by
Looking forward to the update! Thank you @Future-Motion
freshbread last edited by
Nice! Stoked to get home and try it out, and I thought having my mother in law moving out today was the best news of the day ;)
davidw last edited by
Does it have a speed limit setting?
jlk250 last edited by
How do I set the pushback speed? That's the only part of this new firmware I am eager for.
AT_onewheeler last edited by
@davidw typed for 5 minutes through the app but have not found any speed limitation yet. so I do not think so.
AT_onewheeler last edited by AT_onewheeler
@jlk250 that would have been very cool but haven't found any setting of the pushback
Edit: pushback is not only dependent on the speed but on several factors.
would want a% setting for the engine load to alert at x% engine load
davidw last edited by
@AT_onewheeler thank you for checking, sorry to sound boring but the only feature I need is a speed limitation, (this could be easily done by tapering off the acceleration in a curve related to speed) I think also it would maker it more safer for younger riders to re-assure their parents, and for older riders to restrict temptation to showboat beyond their means (me).
AT_onewheeler last edited by AT_onewheeler
@davidw that would have been very convenient too. with sound or vibration on the smartphone as soon as x kmh/mph is exceeded
Glyph last edited by Glyph
@Future-Motion - this is super-cool and I am looking forward to trying it out, but in addition to the speed and pushback customization (or at least, alerts for speed) that others have requested, I think you probably need to implement some Bluetooth security here.
Otherwise, I'm going to connect to my buddy's board and mess with his settings when he's not paying attention, so that the next time he gets on, he's riding a little shaping combo I like to refer to as "The Dive Bomber".
wiz last edited by
Well, that's a bummer. I just got an email that said "Every Onewheel just got BETTER! Introducing Gemini Firmware." So, I tried to do the ones currently in the office (two originals and a plus) and the originals didn't accept it. So I thought "well, soon" and popped in to check the expected date, and found:
The new Gemini firmware leverages the increased power of the Hypercore motor found in Onewheel+ and Onewheel+ XR so unfortunately this update is not transferable to original Onewheels.
So, it's not "Every Onewheel just got BETTER!" after all.
gormaro last edited by
@Future-Motion Not yet seeing the new OneWheel APP in the APP Store. Guess it's being deployed in stages. I'm only seeing the current version of the application at this time. I'm using an iPhone in the Northeast (USA).
Beetle last edited by
@gormaro I was having the same issue, try restarting your phone, then click on the app in the app store. It did not show that there was an update, but after I clicked on the app, it showed there was an update available.
grayforge last edited by
Can you give us more detailed information about what's changed instead of: "takes the experience of riding a Onewheel to the next level" and "improvements to overall rideability"?
- Stronger/earlier pushback when a nose dive is imminent.
- Instead of giving up and nose diving, your OneWheel will keep trying to stay under you, making for a less violent abort.
Or is it really just the addition of custom shaping?
Sorry, maybe I'm OCD, but I like more detailed information on feature changes.
sk8bomb last edited by
Does it fix the bluetooth disconnecting from the phone problem?
Fresh last edited by Fresh
@grayforge The onewheel doesn't just "give up" when a nosedive occurs. It accelerates to keep you from falling forward so if you reach it's top speed... that's just the way the cookie crumbles. There's literally nothing more it can do. Nosedives will always be violent. Keep in mind a wide stance will make nosedives occur more easily so riders with wide stances have much more serious issues with nosedives than others. That's a lever effect and it's why the Onewheel has a serious danger of this and not an EUC. Sorry I said the E-word, I hope noone puked. As for earlier pushback, mission leaves a pretty wide gap, just put your feet closer together maybe or put it in delirium and don't push its limits. If you never go over 15, you'll probably never nosedive on pavement bar user error or unless you're going uphill.
Another thing I keep seeing is people asking for a speed limit. @Davidw the onewheel accelerates to keep you upright, so an actual speed limit is out of the question. Even tapering off would invite nosedives. An audible notification option would indeed be nice, maybe accompanied by snitching to the rider's parents :P At this point, you could bolt an ipod case to the fender, connect and lock the ipod >.>
Wer1Flow last edited by
@sk8bomb I sort of hope not, as Fedex picked up my XR yesterday - shipping it to FM for exactly that kind of fix. I cannot keep a connection for dear life - whenever I am moving. Unless I keep my phone in my socks....which...well - sucks!
DaniëlJack last edited by
@sk8bomb sadly not (tested) it’s a hardware failure
Khayman last edited by
I just had my first ride with the new update, awesome!
But, when I got home my battery was around 28% so I connect the charger.
The boards power button starts flashing as it should when charging but the light on the charger is green?
I open the app and connect and it shows the battery is 0% and not charging at all.
When I disconnect the charger and turn on my board it shows the battery again so the only way to get it to charge now is to have the board turned on and connected to the app and after that I connect the charger, now it works.
What if my board can't turn on because of drained battery, then I'm screwed I guess?
Fresh last edited by
@Khayman I had your problem once. I thought the board had gotten on and off mixed up somehow so my idea was to leave my board on till inactivity turned it off. That seems to have fixed it. Maybe yours will resolve on its own hopefully.