@rk_d said in Why dismount requires getting off the sensor:
(1) from a stand-still roll the board more than a preset number of degrees in either direction. Default to 25' and allow the user to change in the app, for example, from 10' to 75'
(2) from a stand-still, wiggle the board (accelerate in both directions alternately and very quickly) back and forth for a number of times that can be set in the app. Make the default 100 and allow it to be dialed down to as few as two times.
(3) make a setting in the app to disable the board powering down based on the foot pad sensors. Note that this would require extra programming to prevent the board from running off without anyone on board. This is not a hard programming problem if you have an accelerometer and you can measure the effect of torque on the rotation of the platform (IE: measuring the angular momentum of the platform).
What a load of gibberish.