@aftrhours I found a nice one on ebay, seems to fit a more snug than the other ones.https://www.ebay.com/itm/Charger-Port-Protection-for-Onewheel-XLR-Plug-Black/122820321948?epid=2279627967&hash=item1c98a9629c%3Ag%3AGGoAAOSwLdBaJjMD&_sacat=0&_nkw=xlr+plug+dummy+onewheel&_from=R40&rt=nc&_trksid=

@life-themovies Protect your nuggin my friend, by any means necessary.

I am a biggn. I use Triple 8 hired hands, G Form pads, POC Crane Commuter helmet. Had a nasty fall. When I did, my head came down with the rest of my body, AT THE END of the fall and hit a broken branch. The branch was 3 inches of hardwood. After getting up, making sure everything worked, with me not the board, I looked at my helmet, and there is a big dent. So, yeah I believe in a quality helmet. Ride on.

I put the Flight fenders on, then the Surestance was delivered. Put the craft and ride fender with the new Surestance Pro on my XR. Need a Dremel, did think of modifying the board and not the rear flight fender. Keep the grip side up...

@Onewheel_Jason pull up the plate underside it has plenty of adhesive to re apply. Snap shot the serial number with your phone, there, you have a record of your board, and re apply adhesive.Sit down at your computer and warrant your board at Future motion Motion,Easy Peesy.

@craig man feel your pain. I have some new grip tape, Float Life, and I am waiting a bit. Do be sure to look at his video on replacing tape.

@Devon I know the feeling. Grats on your experience.

@RedDog when you open app, look over to the most right side bottom of app. App settings are there, and where goofy footed etc is.

Call onewheel and ask them for a care package.

Here is my first edit with my camera set up, cut short due to rain/thunderstorms. More to follow at a later date.https://www.youtube.com/watch?v=WU5BOaGTLtA&t=1s